Waste Rubber Tire Crusher machine

Recycling and disposal of waste tires, has been a very important topic, if you can recycle the waste tires scientifically, turn waste into treasure, and can not pollute the environment?

Combined with the current practical situation and development, the recycling and processing of waste tires, mainly by means of crushing recycling, the collection of waste tires centralized processing, the use of tire crushing equipment for crushing, grinding powder to make rubber particles or rubber powder, and then is widely used in various fields.

Tire crusher is a set of equipment, the recycling of waste tires not only need to be broken, but also need to be processed through multiple procedures, and then can get particles and rubber powder, again to use.

Product introduction:

The rubber crushing machine consists of one crushing machine, cyclone separator, electric control cabinet and water supply mechanism. The rubber crusher is mainly used for processing rubber powder from waste tires.

Tire crusher is mainly used for grinding tires, wire tires, steel wire tires (radial tires) and various waste rubber products or scraps, making it into rubber powder, and reach the required fineness (mesh number).

Rubber shredder tire crushing machinery and equipment features:

Rubber shredding machine tire crushing machinery equipment by box, motor, industrial gear box, six arris spindle, imported cutter, bottom cutter, frame, bearing box and other main structures.
1. Thick and heavy moving knife, high crushing efficiency, the cutter is cast by alloy steel, strong and long service life.
2. Thick frame plate, high torque resistance, very strong.
3. Adopt microcomputer (PLC) automatic control, set up start, stop, reverse and overload automatic reverse control function.
4. The equipment has the characteristics of low rotation speed, large torque, low noise and dust which can meet the environmental protection standards.
5. Easy to adjust, low maintenance cost and economical.

Working principle of rubber shredding machine tire crushing mechanical equipment:

The main shaft is supported by two ends of bearings. The motor is transmitted to the main shaft through the gear box. The rotating main shaft drives the helical cutting tools. The electric control part is equipped with a reverse automatic control device to overcome the major technical problems of the machine. In order to improve the service life and cutting ability, the spindle and cutter are tempered and tempered.

Structure principle

The cyclone separator is integrated with the main engine, and the electric control cabinet is used for electric appliances. The water supply mechanism can control the cooling of the whole machine, making the material work at normal temperature. The main machine consists of a frame, a feeding mechanism, a motor, a feeding mechanism, a plane (or cone) fixed grinding and a moving grinding disc. In the crushing chamber, the purpose of crushing is achieved through shearing and grinding. At normal temperature, the quality of the crushed materials is ensured. The finished powder is sent into the cyclone separator and into the storage bag through the wind force of the fan.

Advantages of parameters

Low energy consumption, fine particle size, high efficiency, simple operation and no pollution.

Safety rules:

1, after starting, for the machine to run properly,  allowed uniform continuous feed crops.
2, pay attention to the speed of the motor, when working  voice and the temperature of the bearing.
3. When feeding, the operator should stand on one side of the feeding mouth, tighten the sleeves of the clothes, and wear a mask and working cap.
4, feeding, attention should be paid to inputs if there is a stone inside, sickle,  tools with hard objects, such as screw, in order to avoid damage to the machine and cause accidents.
5. No belt hanging, oiling, cleaning and troubleshooting are allowed when the machine is running.
6, found the following problems should be shut down the engine, stop processing,( 57380908,1) motor smoke,( 57380909,2) plug,( 57380910,3) crush quality is not good,( 57380911,4) bearing overheating, more than 60 degrees.

Strictly prohibited items:

1. It is strictly forbidden to peep into the machine from the upper part of the broken cavity during operation.
2. electrical equipment should be connected to the ground, wire insulation should be reliable and installed in the steel pipe laying.
3. It is strictly forbidden to move or remove materials directly by hand in the crushing cavity behind the feeding port during operation.
4. the mill in the operation of any adjustment, cleaning or maintenance work is strictly prohibited.

Investment prospects outlook

With the rapid development of China's automobile industry, China has become the world's second largest tire producer, the annual production of waste tires has exceeded 112 million, about 3.2 million tons. And double-digit annual growth, growing "black pollution" of the already fragile ecological environment in our country, at the same time, the service life of tires is limited, the discarded waste tires don't melt or refractory polymer elastomer material, have very strong thermal, mechanical and corrosion resistance, very difficult to degrade, one hundred are in effect in the ecological environment, causing serious pollution. Such "black pollution", if not treated early, will cause great harm to the environment.

Since the 1970s, in order to effectively eliminate "black pollution", countries around the world, especially European and American countries, began to recycle used tires and try to make fine rubber powder processing technology of scientific research and development. Fine rubber powder made from waste tires can replace some raw rubber, which is a precious secondary resource, and is the best way to deal with "black pollution" in a harmless, resource-based and industrialized way. Recycled rubber powder can be used in the production of tires and other rubber products, and it has a wide market in the fields of modified asphalt laying highways, railway and subway sleeper heat, playground track, leak-proof and seepage-proof materials, building materials, rubber and Plastic Products and so on.

In our country, annual consumption of raw rubber 3.45 million tons, 60% of the need to import, since 2002 has exceeded the United States for three consecutive years to become the industry rubber consumption country. With the rapid development of the economy, the anti-restriction effect of resources on the economy is becoming more and more serious. There are major challenges. This gruesome malignant at present, the domestic many people constantly campaigning, find a can solve the problem of the pollution of the environment of the tire, and can be a huge waste tires into the road of sustainable economic development of renewable resources are available, at home, using waste tires is made into fine powder has a very wide range of "potential" for excavation, its extension application and further processing can form a sunrise industry booming, become a new economic growth point, at the same time, will give China's transportation, chemical industry, building materials and other related industry brings a revolution in the cost. To sum up, waste tire recycling industry will have great market development potential, so the use of tire crusher processing rubber powder meets the requirements of sustainable development of the real economy

Rubber crusher as an investment prospect for retread tires.As an environmental protection equipment for retread tires, rubber crusher is an effective measure for recycling, reducing and harmless waste tires.
Practice has proved that the rubber crusher processing powder as a kind of rubber additives used in new manufacturing of tire crown and sidewall and tire tread rubber formulation, it not only can improve the dynamic performance of the rubber, good for the quality of the products, but also greatly reduce costs, save raw rubber, mechanical rubber crusher according to expert introduction, in the tread compound mixing with 10 activation powder can keep 300% of the tread compound stretch stress and the wear resistance of the tire, do not affect the service life of the tyre. At present, raw rubber, raw and auxiliary materials continue to raise prices, it is to improve economic benefits, the promotion and application of rubber powder has its important significance. The rubber crusher can be used in the tread rubber material by grinding the waste tire into rubber powder.

Pre-sale:
(1) selection of equipment type.
(2) Design and manufacture products according to the special requirements of customers.
(3) training of technical personnel for clients.
(4) The company plans the site for the user free of charge, designs the suitable process and the plan.
On sale:
(1) acceptance of the product.
(2) assisting clients in the preparation of construction plans.
After sale:
(1) assign special after-sales service personnel free of charge to guide customers to install and debug.
(2) installation and debugging of equipment.
(3) on-site training of operators.
(4) after the installation of the complete set of equipment, the full-time technical personnel may assist the customer in on-site production until the user is satisfied.

Contact us if you need more details on Tire Crusher Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Waste Rubber Crusher Machine、Waste Rubber Crusher. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Crusher Machine > Rubber Crusher